3M™ Stikit™ Gold Disc Roll, 01205, 6 in, P320, 75 discs per roll, 12 rolls per case

$44.81 / Roll

SKU	7000119680
Legacy SKU	60455031280
UPC	00051131012059
Catalog Number	01205
Product Number	216U

3M Stikit Gold Disc Roll 216U features aluminum oxide mineral abrasive for a sharp cut and uniform finish during collision repair. These tear-off discs are packed into a single roll and feature Stikit adhesive attachment, making them exceptionally fast and easy to use. Load-resistant coating and available 7-hole pattern help clear dust from the disc surface for longer life.

Adhesive-backed discs tear off conveniently one at a time with no liners for added cost savings
A-weight paper backing is ideal for fine power sanding and finishing
Aluminum oxide mineral combines fast cut with long disc life
Stikit™ discs are easy to attach and remove
Anti-loading coating prevents dust and debris from clogging the disc
Several versions feature 7-hole pattern for added dust removal and loading resistance

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Weight	0.778 lbs
Width	2-1/2 in
Length	2-1/2 in
Height	6 in
Diameter	6 in	152.4 mm
Center Hole Diameter	0 NP

Shipping Dimensions
Weight	9.51956 lb
Length	11 in
Width	8.4 in
Height	7.3 in

Color	Gold

PRODUCT FAQ

What size is the 3M™ Stikit™ Gold Disc Roll, 01205?

The diameter of each disc in the roll is 6 inches.
How many discs are included per roll of the 3M™ Stikit™ Gold Disc Roll, 01205?

There are a total of 75 individual discs per roll.
What is the grit level of the abrasive on these gold discs?

The P320 designation indicates that each disc has a grit level equivalent to a fine sandpaper (approximately 320-grit).
How many rolls come in a case for this product?

The product contains twelve rolls.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000119680 | 3M™ Stikit™ Gold Disc Roll

UPC 00051131012059 | 3M™ Stikit™ Gold Disc Roll

Product Number 216U | 3M™ Stikit™ Gold Disc Roll

The Ease of a Disc Roll, The Speed of Stikit™ Attachment

3M™ Stikit™ disc rolls are a convenient solution for multiple adhesive-backed abrasive discs rolled into a tube. This design allows for easy tearing of one disc at a time, saving time and increasing efficiency. Additionally, there is no need for liners, which reduces material costs. These ready-to-use Stikit™ discs feature a pressure-sensitive adhesive coating on the backs, making it easy to press the disc onto the backup pad. They also remove cleanly, leaving an uncontaminated surface for the next disc. For best results, 3M recommends using Stikit™ discs with 3M™ Stikit™ Disc Pads.

Sharp Abrasive for a Refined Finish

The 3M™ Stikit™ Gold Disc Roll 216U features an open coat construction and aluminum oxide mineral abrasive, providing a sharp cut that is more aggressive than a comparable closed coat abrasive of the same grade. The disc is ideal for featheredging and primer sanding, with a range of medium-coarse to fine grits available. The Stikit™ Gold Disc Roll 216U is suitable for use with all collision repair substrates, including clear coat, fiberglass, paint, primer, and plastic. The disc's light A-weight paper backing makes it easy to handle.

Resists Dust and Debris

The open coat construction of the 3M™ Stikit™ Gold Disc Roll 216U ensures that the abrasive grains are spaced apart, allowing for the evacuation of sanding dust and other debris. This design helps to avoid clogging the cutting edge of the grains, and the anti-loading coating allows the disc to continue cutting even when sanding materials that would otherwise clog the disc. These features increase productivity and reduce material consumption. Select versions of the disc feature a 7-hole pattern that helps clear dust from the surface of the disc, resulting in longer disc life and a more consistent finish.

Better Science for Better Sanding from 3M

The 3M™ Stikit™ Gold Disc Roll 216U is designed for long life, even for tough auto body sanding projects. From its aluminum oxide mineral abrasive to its anti-loading open coat construction to its Stikit™ attachment, this disc roll is another example of how 3M applies science to make life easier for professionals in collision repair.