3M™ Trizact™ Cloth Belt 407EA effectively blends and polishes a variety of metal substrates during light-pressure dimensioning and finishing.
- Used commonly in aerospace, orthopedic implant and surgical instruments, plating and polishing industries
- Grinding aid lowers operating temperature for low-to-medium pressure applications, reducing the risk for part discoloration
- Ideal for use on titanium and works well with a stroke / platen sander
- Available in grades A110, A90, A60 and A20
- Trizact™ abrasives can last up to five times longer than conventional abrasives
|Width||3/4 in||19.05 mm|
|Length||18 in||457.2 mm|
What is the 3M™ Trizact™ Cloth Belt 407EA made of?
The 3M™ Trizact™ Cloth Belt 407EA is made of micro-replicated structures containing aluminum oxide abrasive particles.
How many pieces are included in one case of the A110 JE-weight, 3/4 in x 18 in size?
One case of the A110 JE-weight, 3/4in x 18in size contains a total of two hundred (200) cloth belts.
Is it easy to change the belt's position on my sander tool?
Yes! This cloth belt has a Film-lok and Full-Flex design that ensures quick, clean changes without damaging your tools from forcefully removing old sanders or using cleaning solvent.
Will this product continue to be available?
Yes. As long as customer demand exists, we will keep producing our high-quality products like Trizact Abrasives for various industries including Automotive OEMs and other metal-working applications.
Designed for low to medium pressure applications, 3M™ Trizact™ Cloth Belt 407EA is an abrasive that cuts sharp yet conforms to the substrate. It features a flexible JE-weight backing that enables it to follow surface contours and respond to surface imperfections for a superior finish. The abrasive also has a grinding aid that helps it run cool, reducing the risk for discoloring or warping the substrate due to heat. It is available in a range of grades, descending from A110 to A20.
3M™ Trizact™ abrasives are designed to revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput, and creating consistency. These abrasives achieve big benefits through a patented 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity.
Moreover, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic– contact for a consistent cut. From medical implants to surgical tools to automotive transmission components, 3M™ Trizact™ abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.