Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7010326305
Legacy SKU 60440169963
UPC 00051125155069
Product Number 407EA

3M™ Trizact™ Cloth Belt 407EA effectively blends and polishes a variety of metal substrates during light-pressure dimensioning and finishing.

  • Used commonly in aerospace, orthopedic implant and surgical instruments, plating and polishing industries
  • Grinding aid lowers operating temperature for low-to-medium pressure applications, reducing the risk for part discoloration
  • Ideal for use on titanium and works well with a stroke / platen sander
  • Available in grades A110, A90, A60 and A20
  • Trizact™ abrasives can last up to five times longer than conventional abrasives
  Add to cart
On it's way to you October 10  

Qty

Minimum Order 50 Items
Order Increment 50 Items
  High-Quality Cloth Belt Materials
  Durable
  Versatile
  Multi-Functional
Product Dimensions
Imperial Metric
Width 2 in 50.8 mm
Length 72 in 1828.8 mm
Shipping Dimensions
Weight 7.665 lb
Length 14 in
Width 14 in
Height 4.813 in
Grit Non Pertinent

PRODUCT FAQ

  1. What is the 3M™ Trizact™ Cloth Belt 407EA?

    The 3M™ Trizact™ Cloth Belt 407EA is a high-performance abrasive belt designed to provide consistent finishes on a variety of surfaces.

  2. What are the dimensions and quantity in each case of these belts?

    Each belt measures 2 inches by 72 inches, has an A60 JE-weight rating, features Film-lok backing and full-flex construction. There are typically fifty (50) belts per case.

  3. Can this abrasive belt be used for wet or dry applications?

    Yes! The 3M™ Trizact™ Cloth Belt can be used for both wet and dry sanding operations.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Trizact™ Cloth Belt 407EA

Designed for low to medium pressure applications, 3M™ Trizact™ Cloth Belt 407EA is an abrasive that cuts sharp yet conforms to the substrate. It features a flexible JE-weight backing that enables it to follow surface contours and respond to surface imperfections for a superior finish. The abrasive also has a grinding aid that helps it run cool, reducing the risk for discoloring or warping the substrate due to heat. It is available in a range of grades, descending from A110 to A20.

3M™ Trizact™ abrasives are designed to revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput, and creating consistency. These abrasives achieve big benefits through a patented 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity.

Moreover, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic– contact for a consistent cut. From medical implants to surgical tools to automotive transmission components, 3M™ Trizact™ abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.

  • Designed for low to medium pressure applications
  • Cuts sharp yet conforms to the substrate
  • Flexible JE-weight backing enables the abrasive to follow surface contours and respond to surface imperfections for a superior finish
  • Grinding aid helps it run cool, reducing the risk for discoloring or warping the substrate due to heat
  • Available in a range of grades, descending from A110 to A20
  • 3M™ Trizact™ abrasives achieve big benefits through a patented 3M technology called microreplication
  • Small three-dimensional structures resembling pyramids are adhered to a backing during microreplication
  • These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral
  • The cycle of mineral renewal sustains the abrasive's sharpness
  • Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity
  • Mineral is uniformly distributed over the abrasive surface, providing fixed contact for a consistent cut
  • 3M™ Trizact™ abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part
Applications
Machines
Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.