3M™ Trizact™ Cloth Belt 407EA effectively blends and polishes a variety of metal substrates during light-pressure dimensioning and finishing.
- Used commonly in aerospace, orthopedic implant and surgical instruments, plating and polishing industries
- Grinding aid lowers operating temperature for low-to-medium pressure applications, reducing the risk for part discoloration
- Ideal for use on titanium and works well with a stroke / platen sander
- Available in grades A110, A90, A60 and A20
- Trizact™ abrasives can last up to five times longer than conventional abrasives
|Width||2 in||50.8 mm|
|Length||72 in||1828.8 mm|
What is the dimension of 3M™ Trizact™ Cloth Belt 407EA, A20 JE-weight, 2 in x 72 in, Film-lok, Full-flex, 50 ea/Case?
The dimensions of this product are 2 inches width and 72 inches length with a JE-weight.
How does the film-lok feature in this product work?
The film-lok feature is an attachment mechanism that firmly secures abrasive belts onto your sanding tool for superior performance.
Is it possible to purchase different quantities of these cloth belts?
Yes! This belt comes packaged with a total of 50 pieces per case. If you require smaller or larger quantities we can discuss custom solutions best suited for you.
Can I use these Trizact cloth belts on any kind of materials?
Absolutely! These belts can be used on various types of metals including stainless steel as well as non-ferrous metals such as aluminum and copper.
Designed for low to medium pressure applications, 3M™ Trizact™ Cloth Belt 407EA is an abrasive that cuts sharp yet conforms to the substrate. It features a flexible JE-weight backing that enables it to follow surface contours and respond to surface imperfections for a superior finish. The abrasive also has a grinding aid that helps it run cool, reducing the risk for discoloring or warping the substrate due to heat. It is available in a range of grades, descending from A110 to A20.
3M™ Trizact™ abrasives are ideal for revitalizing light dimensioning and finishing work. They help reduce processing steps, increase throughput, and create consistency. These big benefits are achieved through a patented 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral. The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity.
Moreover, because the mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed – rather than erratic– contact for a consistent cut. From medical implants to surgical tools to automotive transmission components, 3M™ Trizact™ abrasives are uniquely suited for projects with acute technical requirements – delivering a consistent finish part after part.