Scotch-Brite™ Clean and Finish Roll delivers consistent results for finishing, blending, polishing, and cleaning on a variety of metals, wood, plastics surfaces as well as hard-to-reach areas. The roll stock can be easily cut to any length. Clean and Finish roll stock provides consistent surface conditioning for the life of the product.
- Cut-to-fit roll stock provides uniform finishing, blending, polishing, contour finishing, and cleaning
- Conformable pad gets into hard-to-reach areas
- Suitable for hand use or on oscillating and dual pad rubbing machines
- Open web material resists loading, allowing abrasives to maintain a consistent cut-rate
- Suitable for metal, wood, composite and advanced materials
|Width||36 in||914.4 mm|
|Length||30 ft||9.144 m|
What is the Scotch-Brite™ Clean and Finish Roll, CF-RL made of?
The Scotch-Brite™ Clean and Finish Roll, CF-RL is made of silicon carbide (SiC) abrasive mineral.
How does the SiC Very Fine abrasives work to clean and polish surfaces?
The SiC Very Fine abrasives on this roll are highly effective in cleaning and polishing surfaces due to their sharp edges which cut through dirt, grease, and other soils quickly while providing a consistent finish.
Can I use this product on all types of surfaces for cleaning or finishing purposes?
Yes! The Scotch-Brite™ Clean and Finish Roll CF-RL can be safely used on a variety of surfaces including metal, plastic, composite materials among others.
How many rolls are included in each case?
Each case contains one roll with dimensions 36 inches x 30 feet.
. Will using this roll create any dust or particles that could be harmful to breathe?
. No worries about hazardous particles here because the abrasive material used in our products meets ISO Standard 11126 for contaminants found in blasting media. It generates minimal airborne dust when being operated so you don't have to worry about inhalation hazards during usage.
Scotch-Brite™ Clean and Finish Rolls are a versatile abrasive product that can be used for a variety of applications. These rolls are available with three different abrasive minerals: silicon carbide, aluminum oxide, or talc.
Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used to achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications.
Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
The general purpose pad can be cut and used by hand for precise control. Wider width stock can be cut and paired with a hand pad holder for uniform finishing, or on an inline or oscillating sander to cover larger areas. The load resistance keeps the abrasive particles exposed to maintain a consistent cut rate.
- Available with silicon carbide, aluminum oxide, or talc abrasive mineral
- Combines abrasives and non-woven material for consistent results
- Open-web material runs cool and is load resistant
- Can be cut and used by hand or with a holder for uniform finishing