3M™ Nitrile High Performance Plastic Adhesive 1099, Tan, 55 Gallon Agitator (54 Gallon Net), Drum

$141.86 / US gallon

SKU	7010309716
Legacy SKU	62109995308
UPC	00021200198151
Catalog Number	1099
Product Number	1099

3M Nitrile High Performance Plastic Adhesive 1099 creates assembled bonds that are proven to be strong. Drying quickly at room temperature with approximately 40 minutes of working time, this adhesive bonds well to plastics and vinyl, providing long-term adhesion with resistance to substrate plasticizer migration; it can also achieve even higher bonding properties through heat-initiated chemical reaction. 3M Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates, including leather an

FOR INDUSTRIAL USE ONLY: This product is designed exclusively for industrial applications
HIGH-PERFORMANCE ADHESION: Forms strong bonds on most vinyls and plastics
HIGH-STRENGTH: Provides strong, quick-drying bonds at room temperature, with 40 minutes of working time
TEMPERATURE-ACTIVATED BENEFITS: Optional heat curing increases bond strength
APPLY YOUR WAY: Capable of being applied with industrial-grade spray equipment

Add to cart

Multiple Application Use

High Performance Solvents

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	444.85537 lb
Length	24.01575 in
Width	24.01575 in
Height	34.76378 in

Color	Light Tan

PRODUCT FAQ

What is the 3M™ Nitrile High Performance Plastic Adhesive 1099 used for?

The 3M™ Nitrile High Performance Plastic Adhesive 1099 is specifically designed to bond difficult-to-bond plastic and rubber substrates.
Is this adhesive weather-resistant?

Yes, the 3M™ Nitrile High Performance Plastic Adhesive 1099 provides excellent resistance to water, most oils, plasticizers, and shop fluids.
How much area can one Agitator Drum cover?

The Tan colored Agitator Drum contains about 54 gallons of adhesive which allows you to cover a large area; however it depends on your specific application needs.
How long does it take for the adhesive to fully cure once applied?

Once applied, the curing time may vary depending on environmental factors such as temperature and humidity. However typically after approximately two weeks there should be full curing done.
Q : Can I use this adhesive with metal substrates too?

A :The main purpose for creating this product was by keeping in mind bonding difficult-to-bond plastics and rubbers but that certainly doesn't mean that you cannot use it on metals. It can also be used effectively contribute with some primers sold by us for good adhesion properties towards various metals like aluminum,stainless steel among others.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010309716 | 3M™ Nitrile High Performance Plastic Adhesive 1099

Ideal for Vinyl & Plastic

3M™ Nitrile High Performance Plastic Adhesive 1099 is a strong adhesive that bonds to a variety of substrates, including leather, most vinyl sheeting used in awnings, upholstery, and faux leather, as well as plastics. However, it may stain thin or light-colored vinyls.

Recommended Applications

Bonding most vinyls and plastics (not recommended for polyolefin plastic bonding)
Aftermarket automotive repair, including panel installation and upholstery
Banners and awnings
General industrial
MRO

Speed Up the Bonding Process

3M™ Nitrile High Performance Plastic Adhesive 1099 is a fast-drying adhesive that forms a durable bond at room temperature. It also has an optional heat-initiated chemical reaction to achieve even higher bond properties. This adhesive is sprayable with industrial-grade spray equipment, making it convenient and consistent for large-scale applications.

Applying Your Adhesive

Whether it is being sprayed, brushed, or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.