Scotch-Brite™ Finishing Flap Brush, 6 in x 3 in x 2 in 6S ULF, 1 ea/Case, SPR 017571A

$130.52 / Each

SKU	7010366466
Legacy SKU	61500154259
UPC	00048011278803
Product Number	CF-FB

Scotch-Brite Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
Provides more surface contact than bristle-type brushes
Continuously supplies fresh abrasives for consistent, uniform finishes
Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
Achieves decorative finishes on metal, wood, and composites

Add to cart

High-Quality Materials

Multi-Functional

Adaptable

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	6 in	152.4 mm

Shipping Dimensions
Weight	0.9195 lb
Length	6.9 in
Width	6.9 in
Height	4.4 in

Color	Gray
Thread Size	Non Pertinent
Maximum Speed	3,400 rpm

PRODUCT FAQ

What is the Scotch-Brite™ Finishing Flap Brush used for?

The 3M Scotch-Brite™ Finishing Flap Brush is designed to provide consistent finishes on a variety of metals and non-metallic surfaces.
Is this brush suitable for deburring or heavy duty cleaning applications?

No, this brush is not recommended for deburring or heavy-duty cleaning. It's ideal application would be light blending and finishing tasks.
What sizes are available for this product?

This product comes in a standard size - 6 inches by 3 inches by 2 inches with the item number SPR-017571A.
Can I use it on my hand drill machine?

Yes, the Scotch-Brite™ Finishing Flap Brush can be used with any compatible portable drill using a 1/4-inch mandrel like our A0319 Mandrel Assembly.
. Which material has been used to manufacture these brushes ?

. These Scotchtite flap brushes have abrasive flaps made from coated aluminum oxide resin fiber which provides uniform grit distribution and increased cutting efficiency while delivering long-lasting performance over time.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.

This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.