Scotch-Brite™ Finishing Flap Brush, 12 in x 2 in x 5 in 7A VFN, 1 ea/Case

$173.96 / Each

SKU	7010366654
Legacy SKU	61500188406
UPC	00048011183015
Product Number	CF-FB

Scotch-Brite Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
Provides more surface contact than bristle-type brushes
Continuously supplies fresh abrasives for consistent, uniform finishes
Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
Achieves decorative finishes on metal, wood, and composites

Add to cart

High-Quality Materials

Multi-Functional

Adaptable

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	12 in	304.8 mm

Shipping Dimensions
Weight	2.283 lb
Length	12.4 in
Width	12.4 in
Height	2.6 in

Color	Maroon
Maximum Speed	2,500 rpm

PRODUCT FAQ

What is Scotch-Brite Finishing Flap Brush made of?

The Scotch-Brite Finishing Flap Brush, 12 in x 2 in x 5 in 7A VFN, 1 ea/Case is made with a combination of synthetic fibers and abrasive particles.
What makes the Scotch-Brite Finishing Flap Brush different from other finishing brushes?

This brush allows for controlled finish while still being able to maintain edge durability. It also has an open-web that resists loading which helps increase product life and provides consistent results.
Can I use this finishing flap brush on all types of metals?

Yes! This particular brush can be used on various kinds of metal surfaces such as aluminum, brass, bronze, copper and many more!
How long will the Scotch-Brite™ Finishing Flap Brush last before needing to be replaced?

Our customers have reported back that their usage times have gone up by two maybe three times what they were getting out of their traditional coated abrasive flap brushes with the replacement interval dependent on application specifics.
. Will my finished piece have swirl marks after using this brushing tools.

. No. By design the flaps flex so as to minimize cutting action within soft metals minimizing tangential scratches/swirls associated when using coarser products

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010366654 | Scotch-Brite™ Finishing Flap Brush

UPC 00048011183015 | Scotch-Brite™ Finishing Flap Brush

Product Number CF-FB | Scotch-Brite™ Finishing Flap Brush

Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.

This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.