Scotch-Brite™ Clean and Finish Finishing Flap Brush, CF-FB, TS Red Core, 7A Very Fine, 8 in x 25 in x 2.95 in, 1 ea/Case

$1,041.27 / Each

SKU	7010367042
Legacy SKU	61500313871
UPC	00076308643263
Product Number	CF-FB

The Scotch-Brite Clean and Finish Flap Brush was engineered to perform a variety of aesthetic finishing applications on wood and metals. Whether primer scuffing and wood defuzzing or removing metal burrs and imperfections, the flaps effectively clean up the workpiece while still delivering a consistent finish.

High-value brush with good performance for a variety of finishing applications in metalworking and woodworking
Offered in a broad range of grades and densities
Flap construction helps brush continually lap the surface, resulting in finer finishes
Some brushes feature a Roloc™ or Roloc™+ attachment system for swift and easy connection to a die grinder
May be used on a variety of substrates, including wood, metal and paint

Add to cart

High-Quality Materials

Multi-Functional

Adaptable

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Diameter	8 in	203.2 mm

Shipping Dimensions
Weight	13.666 lb
Length	8.7 in
Width	8.7 in
Height	26.3 in

Maximum Speed	3,200 rpm

PRODUCT FAQ

What makes the Scotch-Brite™ Clean and Finish Finishing Flap Brush unique compared to other finishing brushes?

The Scotch-Brite™ Clean and Finish Finishing Flap Brush is designed with abrasive flaps that are interspersed with non-woven flaps, allowing for a more controlled cut and less heat buildup. It also has a long life span due to its durable construction.
How can I use this brush in my sanding or finishing process?

The Scotch-Brite™ Clean and Finish Finishing Flap Brush can be used on various surfaces such as metal, wood, plastics, ceramics, among others. It is versatile since it works well on both flat and contoured surfaces.
Is there a recommended speed setting for using this brush?

A variable-speed angle grinder ranging between 3,000-4,500 RPMs should provide optimal results when using the clean and finish flap brush.
Can I purchase just one cleaning flap of this product or do they come in sets?

One flap of the Scotch-Brite™ Clean and Finish Finishing Flap Brush comes per case but you would need just one cleaning flap.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Under the Microscope: Anatomy of a Scotch-Brite™ Flap Brush

Scotch-Brite™ Clean and Finish Flap Brush is a versatile brush that is commonly used for aesthetic finishing applications. The brush is infused with abrasive mineral to give uniform cut and finish throughout product life. The open, flexible flap construction is soft and pliable to produce uniform surface finishes without chatter marks. Flaps are secured to a fibre core and repeatedly lap the substrate's surface. As flaps lap the surface, they brush and finish areas that may have been passed over by more rigid abrasives — striking a balance between strength and finesse.

Scotch-Brite™ Clean and Finish Flap Brushes are offered in a variety of minerals, grades and densities. Some brushes feature a Roloc™ or Roloc™+ system, which makes attachment to a die grinder swift and efficient and eliminates the need for attachment accessories and tools. The threaded shank can be twisted into the Roloc™ or Roloc+™ Holder mounted to the tool's collet or chuck. Non-Roloc brushes require use of a flange and locking nut for secure attachment to the tool.

This brush is offered in varying grades of silicon carbide and aluminum oxide mineral. Silicon carbide is a synthetic mineral that's very hard and sharp. It breaks down faster than aluminum oxide but delivers a finer finish. Conversely, aluminum oxide is very durable and lasts longer but finishes coarser than silicon carbide grade for grade. Project needs and requirements — be it aggressive removal or fine finish — will likely influence mineral choice. Independent of the mineral chosen, operators can rely on consistent results.

Applications

Cleaning and light deburring
Satin finishing on metal
Defuzzing wood prior to varnishing
Primer scuffing before final coat

Benefits of Scotch-Brite™ Clean and Finish Flap Brushes

Overall, the unique construction of flap brushes minimizes chatter marks and streaks. Under normal use, flaps rotate centrifugally and make continuous contact with the workpiece. By lapping the surface, the flaps eliminate the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft. Scotch-Brite™ Clean and Finish Flap Brushes are high-value brushes with good performance for a variety of applications in metalworking and woodworking — these versatile abrasives are a great addition to any workshop.