3M™ Cubitron™ ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.
- Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Durable polyester backing material stands up to high unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
- Great for applications where finish is important
|Diameter||4 in||101.6 mm|
|Maximum Speed||15,000 rpm|
What are the key features of 3M™ Cubitron™ II Flap Disc 969F, 60+, T29?
The key features of this flap disc include its unique construction using precisely shaped ceramic grains to achieve a fast cut rate and prolonged disc life. It's also designed for reduced operator fatigue with cooler cutting temperatures.
Can you tell me about the size and quantity of discs in each case?
Sure! Each case comes with ten discs that measure four inches by three-eighths inch thick and have a T29 angled backing plate configuration.
Is this flap disc easy to use on different materials?
Yes, it certainly is! The 3M™ Cubitron™ II Flap Disc excels at quickly removing welds, light burrs, and corrosion from various metals like stainless steel, mild steel, galvanized steel as well as some plastics.
How durable are these flap discs in high-pressure grinding applications?
This product is engineered specifically for heavy-duty grinding operations such as blending edges or smoothing out welds. As long as it's used properly under recommended conditions there should be no worry!
Is there any precaution I need to take before ordering your products online?
A：It’s important to ensure you select the appropriate grit particle size required for desired finish results according to your application needs. If still unsure about which abrasive works best for your process—reach out an expert like myself who can guide you towards making the right choice tailormade according to task-specific requirements.
3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.Flap Disc Design
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.Powered by 3M Precision-Shaped Grain
3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.Applications
- Edge deburring
- Aggressive weld removal