3M™ Cubitron™ ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.
- Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Durable polyester backing material stands up to high unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
- Great for applications where finish is important
|Diameter||5 in||127 mm|
|Maximum Speed||12,000 rpm|
What is the grit size and angle of 3M™ Cubitron™ II Flap Disc 969F?
The grit size for the flap disc is 80+ and it has a T29 angled shape giving you access to hard-to-reach areas.
How many flap discs are included in each case of 3M™ Cubitron™ II Flap Disc 969F, 80+, T29, 5 in x 7/8 in?
There are ten (10) flap discs included in each case.
Can I use this product on stainless steel surfaces?
Yes, you can absolutely use this product on stainless steel surfaces. In fact, the high-performance ceramic abrasive grains cut cooler and faster which makes them perfect for tough applications like grinding or finishing metal – including stainless steel.
3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.Flap Disc Design
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.Powered by 3M Precision-Shaped Grain
3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.Applications
- Edge deburring
- Aggressive weld removal