3M™ Cubitron™ ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.
- Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Durable polyester backing material stands up to high unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
- Great for applications where finish is important
|Diameter||5 in||127 mm|
|Maximum Speed||12,000 rpm|
What is the 3M Cubitron II Flap Disc 969F made of?
The 3M Cubitron II Flap Disc 969F is made from a precision-shaped grain that cuts faster and lasts longer than other abrasive grains.
How can this flap disc help me save time in my work?
Due to its fast-cutting capabilities and long life, the 3M Cubitron II Flap Disc 969F requires less changeover time and lasts up to four times longer than conventional discs, saving you valuable time on your projects.
Can I use this flap disc for grinding stainless steel, titanium or other metals?
Yes. This flap disc is designed for heavy-duty metalworking applications including weld removal, beveling, deburring and blending stainless steel and other alloys.
Does it come in different sizes or quantities?
Yes. The product comes in different sizes starting at four inches (4-inch) with standard arbor holes as well as the Quick Change attachment system which reduces downtime when changing discs.
The product also comes in varying quantity packs starting at one unit all the way up to ten units per pack.
. Will it fit with most angle grinders?
.Yes.If your angle grinder has a 5/8-11” threaded shaft then yes – this would work perfectly straight out of the box!
3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.Flap Disc Design
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.Powered by 3M Precision-Shaped Grain
3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.Applications
- Edge deburring
- Aggressive weld removal