3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.
- Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
- Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
- Adhesive can be applied by spray, brush or roller
- Non-flammable in its wet state
What is the recommended usage of 3M™ Fastbond™ Contact Adhesive 30NF?
Our 3M™ Fastbond™ Contact Adhesive 30NF is ideal for bonding HPL to particleboard or MDF, attaching vinyl sheeting and fabrics.
Can I use it with a brush or roller instead of a sprayer?
Yes! You can apply our adhesive using spray, brush or roll methods. It works well with most surfaces.
Is it safe to use indoors around people when wet?
Absolutely! Our water-based adhesive has low VOC content and no hazardous air pollutants. Safe for indoor applications once dry.
3M™ Fastbond™ Contact Adhesive 30NF is a powerful adhesive that creates a strong bond resistant to high heat. It has a bonding range of up to four hours and is ideal for decorative laminate applications where non-flammability and low VOCs are critical. This adhesive is post-formable and heat resistant, making it an optimal solution in settings where fire protection is of utmost concern.Recommended Applications
- Most formed plastics
- Plastic laminate
- Wood veneer
3M™ Low Mist Contact Adhesive 30NF is formulated to be a fast-acting solution that delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.