3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.
- Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
- Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
- Adhesive can be applied by spray, brush or roller
- Non-flammable in its wet state
What kind of surfaces is the 3M™ Fastbond™ Contact Adhesive 30NF suitable for?
The 3M™ Fastbond™ Contact Adhesive 30NF can bond a wide range of surfaces, including decorative laminates, metal, wood and various plastics.
Is it easy to apply the adhesive?
Yes! Simply use a spray gun or brush to apply it evenly on both surfaces you want to bond. Wait a few minutes until it becomes tacky before joining them together.
How much area can one quart of this adhesive cover?
One Quart Can of this adhesive covers around 200 square feet. However, coverage depends on how porous and absorbent your surface is.
3M™ Fastbond™ Contact Adhesive 30NF is a powerful adhesive designed to create a strong bond that can withstand high heat. It has a bonding range of up to four hours and is ideal for decorative laminate applications where non-flammability and low VOCs are critical. This adhesive is post-formable and heat resistant, making it an optimal solution in settings where fire protection is of utmost concern.Recommended Applications
- Most formed plastics
- Plastic laminate
- Wood veneer
3M™ Low Mist Contact Adhesive 30NF is formulated to be a fast-acting solution that delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.Applying Your Adhesive
Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.