Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000121382
Legacy SKU 62427495304
UPC 00021200211836
Part Number 21183
Product Number 30NF

3M™ Fastbond™ Contact Adhesive 30NF is a low-odor, water-based, adhesive designed to have high strength, high coverage, long bonding range and good heat resistance. This classic adhesive has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer and canvas.

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state
  Add to cart
On it's way to you October 4   


Minimum Order 52 US gallons
Order Increment 52 US gallons
Immense Durability
Multi-Purpose Uses
Fast Shipping
Industry Low Price
Product Dimensions
Imperial Metric
Shipping Dimensions
Weight 531.82 lb
Length 23.75 in
Width 23.75 in
Height 34.875 in
Color Neutral


  1. What types of surfaces can the 3M™ Fastbond™ Contact Adhesive 30NF, Neutral bond to?

    The 3M™ Fastbond™ Contact Adhesive 30NF, Neutral can bond to a variety of substrates including wood, rubber, plastic laminates and metals.

  2. Does the adhesive require any preparation before application?

    Yes it does. Prior to application of the adhesive surface should be cleaned with suitable solvents or detergents in order to remove any dirt or debris that may interfere with adhesion.

  3. Is this product VOC compliant for my location?

    Yes, it is. This product has been approved by regulatory authorities throughout several jurisdictions as complying fully with volatile organic compounds (VOC) regulations.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Fastbond™ Contact Adhesive 30NF

3M™ Fastbond™ Contact Adhesive 30NF is a powerful adhesive that creates a strong bond resistant to high heat. It has a bonding range of up to four hours and is ideal for decorative laminate applications where non-flammability and low VOCs are critical. This adhesive is post-formable and heat resistant, making it an optimal solution in settings where fire protection is of utmost concern.

Recommended Applications
  • Most formed plastics
  • Plastic laminate
  • Wood
  • Plywood
  • Wood veneer
  • Canvas

3M™ Low Mist Contact Adhesive 30NF is formulated to be a fast-acting solution that delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.

Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

Brochures, Catalogs & Data Sheets
Other Products in this Family