3M™ Fastbond™ Contact Adhesive 30NF, Neutral, 1 Gallon, 4 Can/Case

$116.06 / Canister

SKU	7000046568
Legacy SKU	62427475306
UPC	00021200211812
Catalog Number	30NF
Product Number	30NF

3M Fastbond Contact Adhesive 30NF is a low-odor, water-based adhesive designed to deliver a high-strength, high-coverage bond with a bonding range of 4 hours. Post-formable and high-temperature-resistant, this adhesive is non-flammable in the wet state. 3M Fastbond Contact Adhesive 30NF is proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

FOR INDUSTRIAL USE ONLY: This product is designed exclusively for industrial applications
ADHERES A VARIETY OF SUBSTRATES: Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas
TOUGH, RESILIENT BONDS: Creates a high-strength, high-temperature-resistant bond
LONG BONDING RANGE: Delivers up to a four-hour bonding range
A VARIETY OF APPLICATION METHODS: Can be applied by either spray, brush, or roller
NON-FLAMMABLE: Non-flammable in its wet state

Add to cart

Immense Durability

Multi-Purpose Uses

Fast Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	9.42917 lbs
Width	7.66535 in
Length	3.92992 in
Height	11.9 in

Shipping Dimensions
Weight	38.55003 lb
Length	15.98425 in
Width	9.37008 in
Height	12.67717 in

Color	Neutral

PRODUCT FAQ

What is the 3M™ Fastbond™ Contact Adhesive 30NF?

The 3M™ Fastbond™ Contact Adhesive 30NF is a versatile adhesive that can bond many decorative laminates, particle board, and cloth-to-wood.
Is this product easy to use?

Yes! The smooth consistency of the adhesive makes it easy to apply without dripping or running.
How long does it take for the adhesive to dry?

It typically only takes around one minute for the surface of both materials being bonded with this contact adhesive to become dry enough for bonding.
Can I use this on foam products?

Unfortunately, no. This particular version of our product isn't recommended for use with foam materials.
Is there enough content in just one gallon container?

The gallon size can should be sufficient for roughly about 135 square feet per gallon using a standard nip roller.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M™ Fastbond™ Contact Adhesive 30NF

3M™ Fastbond™ Contact Adhesive 30NF is a powerful adhesive that creates a strong bond resistant to high heat. It has a bonding range of up to four hours and is ideal for decorative laminate applications where non-flammability and low VOCs are critical. This adhesive is post-formable and heat resistant, making it an optimal solution in settings where fire protection is of utmost concern.

Recommended Applications

Most formed plastics
Plastic laminate
Wood
Plywood
Wood veneer
Canvas

3M™ Low Mist Contact Adhesive 30NF is formulated to be a fast-acting solution that delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments. With 3M™ Low Mist Contact Adhesive 30NF, you can leverage the advantages that come from an adhesive that is ready to meet the demands of many tough applications.

Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.