Scotch-Brite™ Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.
- Made with Aluminum Oxide mineral, which provides an aggressive cut for heavy duty blending and finishing
- Non-woven web construction helps resist premature loading, contributing to longer service life
- Good replacement for rubber bonded wheel
- Ideal for aggressive blending and finishing
|Diameter||6 in||152.4 mm|
|Maximum Speed||6,000 rpm|
What is the Scotch-Brite™ Cut and Polish Wheel used for?
The 3M Scotch-Brite™ Cut and Polish Wheel, CP-WL coarse grits are designed to remove surface defects such as rust, corrosion, deburring or oxide coatings.
What particle size does the wheel have?
The 7A Coarse sized wheel has a diameter of 6 in x 1/2 in x 1 in.
How long does each wheel last?
This will depend on your usage but typically one case can be used across multiple projects before they become worn out.
Can I use this cut and polish wheel with my drill press?
Yes! These wheels are excellent when working with drills.
Q:Is it possible to get these wheels individually rather then purchasing an entire case
A : Unfortunately no,, these cut and polish wheels come pre-packaged at four per box.
Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. These wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders.