Scotch-Brite™ Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.
- Made with Aluminum Oxide mineral, which provides an aggressive cut for heavy duty blending and finishing
- Non-woven web construction helps resist premature loading, contributing to longer service life
- Good replacement for rubber bonded wheel
- Ideal for aggressive blending and finishing
|Diameter||10 in||254 mm|
|Maximum Speed||3,600 rpm|
What material can the Scotch-Brite™ Cut and Polish Wheel be used on?
The CP-WL, 5A Fine, is ideal for use on various metals such as steel, stainless steel, aluminum and non-ferrous metals.
What are the dimensions of the Scotch-Brite™ Cut and Polish Wheel?
The dimension of this wheel is 10 inches in diameter by 2 inches wide with a center hole that measures 5 inches.
How does it compare to other similar products in terms of performance?
The CP-WL offers excellent cut rates compared to other similar finishing wheels while maintaining high-quality finishes without damaging or discoloring your workpiece surfaces. It can perform better than standard abrasive wheels when removing rust or corrosion from metal parts.
Is it possible to reuse this product after several uses?
Yes! This wheel provides a consistent cut throughout its life and shows less wear over time when used correctly which means you'll get more value out of each one.
Should I use any specific machine with this product?
A; This wheel fits most bench grinders with a shaft speed no faster than 3,600 RPMs (revolutions per minute) for optimal results.
Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. These wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders.