Scotch-Brite™ Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.
- Made with Aluminum Oxide mineral, which provides an aggressive cut for heavy duty blending and finishing
- Non-woven web construction helps resist premature loading, contributing to longer service life
- Good replacement for rubber bonded wheel
- Ideal for aggressive blending and finishing
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What is the Scotch-Brite™ Cut and Polish Wheel used for?
The Scotch-Brite™ Cut and Polish Wheel, CP-WL, 5A Fine, 8 in x 1-1/2 in x 3in is designed for use on a variety of metals to create a uniform finish.
Will this wheel remove deep scratches from my stainless steel surface?
Yes, the fine grit of the CP-WL wheel is specifically engineered to remove light scratches and produce a smooth finish without damaging the original geometry of your workpiece.
How long does this polishing wheel typically last?
The longevity of each CP-WL depends on several factors such as application, pressure applied during use. It's always best to change it when performance starts reducing.
Is it safe to use with personal safety equipment?
The wheels are not OSHA certified but they don't release hazardous particles while at work or exccessive momentrum that might lead danger.It's important you make sure to take all required first aid measures before engaging yourself with any task.
:What if I have more questions about using these wheels or want information on other products offered by your company?
A :We are happy to help! Please do contact us via our website at www.3m.com/contactus where you will find phone numbers for regional offices around the world. We can happily recommend additional products based on specific applications requirements if need be as well as offer technical support so feel free communicating back how we may assist further..
Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. These wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders.