Scotch-Brite™ Cut and Polish Wheels are built for aggressive blending and finishing applications. Harder than other finishing wheels, Cut and Polish Wheels are good for defect removal or heavy scratch blending and produces a finish with a tight scratch pattern.
- Made with Aluminum Oxide mineral, which provides an aggressive cut for heavy duty blending and finishing
- Non-woven web construction helps resist premature loading, contributing to longer service life
- Good replacement for rubber bonded wheel
- Ideal for aggressive blending and finishing
|Diameter||10 in||254 mm|
|Maximum Speed||3,600 rpm|
What is the Scotch-Brite™ Cut and Polish Wheel CP-WL made of?
The 3M Scotch-Brite™ Cut and Polish Wheel CP-WL consists of a non-woven material, combined with aluminum oxide mineral.
What is the weight of one piece of this product?
A single unit weighs approximately 2.6 lbs (1.18 kg).
Can I use this wheel to polish metals such as brass or copper?
Certainly! This wheel is suitable for polishing metals like steel, stainless steel, brass and copper.
Does it scratch metal surfaces while cutting/polishing?
No, it doesn’t introduce scratches on the surface when removing dirt or oxidation for smooth finishing.
Can I reuse this cut and polish wheel after using it once?
The life-span may vary depending upon different factors like speed/pressure applied during usage but you can undoubtedly find more than one use from each cut & polish wheel provided that performance remains acceptable based on your application requirements.
Scotch-Brite™ Cut and Polish Wheels use aluminum oxide abrasive, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or other synthetic fibers. Combining abrasives into the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material is load resistant and keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Cut and Polish Wheels help to remove surface defects and coarse grindlines, blend forging marks and machining mismatches while leaving a uniform grain finish. These wheels are available in a range of diameters and widths and can be used with robotics, inline sanders, bench motors, backstands and centerless grinders.