Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7000120745
Legacy SKU 61500082708
UPC 00048011157856
Product Number CF-FB

Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

  • Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
  • Provides more surface contact than bristle-type brushes
  • Continuously supplies fresh abrasives for consistent, uniform finishes
  • Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
  • Achieves decorative finishes on metal, wood, and composites
  Add to cart
On it's way to you October 24  

Qty

Minimum Order 1 Item
Order Increment 1 Item
  High-Quality Materials
  Multi-Functional
  Adaptable
  Industry Low Price
Product Dimensions
Imperial Metric
Width 4 in 101.6 mm
Diameter 8 in 203.2 mm
Center Hole Diameter 3 in 76.2 mm
Shipping Dimensions
Weight 2.5 lb
Length 8.7 in
Width 8.6 in
Height 4.9 in
Color Maroon
Maximum Speed 3,200 rpm
Grit Non Pertinent

PRODUCT FAQ

  1. What is the Scotch-Brite™ Finishing Flap Brush, 8 in x 4 in x 3 in 7A FIN typically used for?

    The Scotch-Brite™ Finishing Flap Brush, 8 in x 4 in x 3 in 7A FIN is designed to provide a uniform finish on various surfaces such as metal, wood and plastic.

  2. Can this brush be used with power tools or just hand operated sander?

    Yes! The Scotch-Brite™ Finishing Flap Brush, 8 in x 4 in x 3 in can be used safely with both hand-held and stationary sanders.

  3. How often should I replace these brushes if I use them regularly?

    Depending on usage frequency, usually the brushes tend to last around two weeks before showing signs of wear. Nevertheless we recommend replacing them after every month when using them frequently to maintain their effectiveness.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.

This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Applications
Machines
Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.