Scotch-Brite™ Finishing Flap Brush, 8 in x 6 in x 3 in 5A FIN, 1 ea/Case

$253.06 / Each

SKU	7010328570
Legacy SKU	61500050440
UPC	00048011130750
Product Number	CF-FB

Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. This long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.

Soft density and med/fine/very fine abrasive grades produce brushed surfaces without compounds
Provides more surface contact than bristle-type brushes
Continuously supplies fresh abrasives for consistent, uniform finishes
Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
Achieves decorative finishes on metal, wood, and composites

Add to cart

High-Quality Materials

Multi-Functional

Adaptable

Industry Low Price

Product Dimensions	Imperial	Metric
Width	6 in	152.4 mm
Diameter	8 in	203.2 mm
Center Hole Diameter	3 in	76.2 mm

Shipping Dimensions
Weight	3.21 lb
Length	8.6 in
Width	8.5 in
Height	6.7 in

Color	Maroon
Maximum Speed	3,200 rpm
Grit	Non Pertinent

PRODUCT FAQ

What makes 3M's Scotch-Brite™ Finishing Flap Brush better than other finishing flap brushes?

The Scotch-Brite™ Finishing Flap Brush is designed with flexible flaps that conform to the surface you are working on, providing more contact and a cleaner finish. The abrasive mineral delivers a consistent cut rate across the life of the brush.
Can I use this finishing flap brush on any surface or material?

Yes! The Scotch-Brite™ Finishing Flap Brush can be used on almost any material, including metals, composites, glass, and plastics. It excels at deburring edges and removing rust while also leaving a clean finish.
How long will one Scotch-Brite™ Finishing Flap Brush last before it needs to be replaced?

Depending on usage and application methods, each brush can have different lives. However, With proper care and maintenance like cleaning after each use ,the individual fibers of the product may wear but in general it has longer lifespan compared to its competitors.. Ultimately though our recommendation is based upon how much wear remains until part replacement occurs as visual assessment is needed for determining change-out intervals.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.

This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.