Scotch-Brite™ Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections – or smoothing a rough surface – it’s a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
|Diameter||8 in||203.2 mm|
What is the purpose of the Scotch-Brite Clean and Strip Disc, CS-DC, SiC Extra Coarse?
The Scotch-Brite Clean and Strip Disc is designed for heavy-duty surface preparation work such as removing rust, paint, scale and coatings.
How many discs are included in each case?
There are 15 discs included in each case.
Is it easy to attach this disc to a power tool?
Yes, it's very easy. This disc has a simple hook-and-loop attachment system that makes it quick and simple to switch out with other discs as needed.
Can this disc be used on all types of surfaces?
The Scotch-Brite Clean and Strip Disc is suitable for use on most metal surfaces including steel and stainless steel. However, we recommend testing a small area first to ensure compatibility with your particular application.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.Silicon Carbide Mineral Cuts Sharp and Leaves a Bright Finish
Nylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.The Many Benefits of Scotch Brite™ Abrasives
As a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.