through rough waters
Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 7 in x 7/8 in, 15 ea/Case
$23.25 / Each
| SKU | 7100020897 |
|---|---|
| Legacy SKU | 61500008596 |
| UPC | 00048011009551 |
| Product Number | CS-DC |
Scotch-Brite Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections or smoothing a rough surface its a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 7 in | 177.8 mm |
| Center Hole Diameter | 7/8 in | 22.098 mm |
Shipping Dimensions |
|
| Weight | 4.12507 lb |
|---|---|
| Length | 9.6063 in |
| Width | 9.48819 in |
| Height | 11.61417 in |
| Color | Black |
|---|---|
| Thread Size | Non Pertinent |
| Maximum Speed | 3,300 rpm |
PRODUCT FAQ
-
What is the 3M Scotch-Brite™ Clean and Strip Disc used for?
The Clean and Strip Disc is an extra coarse disc that effectively removes rust, paint, coatings, adhesives, as well as weld burns and other surface contaminants.
-
Can I use this disc on any material?
Yes! This disc can be used on metal (such as steel or aluminum), plastic surfaces, copper pipes and tubing- virtually anything you would use sandpaper on.
-
How many discs come in a pack?
A case of these discs contains fifteen pieces.
-
Will using the clean & strip disc damage my workpiece?
: When used properly according to instructions provided with the product ,the 3m clean & strip disc will not cause damage to your workpiece.
-
Q: What's unique about SiC abrasive grains found in this item?
A : Silicon carbide abrasive grains used in our Scotch Brite components has sharp cutting edges which provide a high cut-rate combined with long life. This results in lower force being exerted onto the workpiece during operation compared to traditional abrasives.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright FinishNylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ AbrasivesAs a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.
