Scotch-Brite™ Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections – or smoothing a rough surface – it’s a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
|Diameter||6 in||152.4 mm|
What makes the Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 6 in x 1/4 inch different from other abrasive discs?
The Scotch-Brite™ Clean and Strip Disc is made of a highly conformable web that conforms to irregular surfaces for improved cleaning. Unlike traditional abrasives that leave inconsistent scratch patterns, this disc delivers consistent results throughout its life while maintaining the shape of the surface being worked on.
Can I use this product on aluminum or stainless steel?
Absolutely! This disc works great with most metals including stainless steel and aluminum for light deburring applications. It has silicon carbide mineral which cuts sharply while leaving an excellent finish behind.
How many discs come in each case?
Each case comes with 15 Scotch-Brite™ Clean and Strip Discs sized at 6 inches by 1/4 inch. This should give you enough supplies to deal with various projects over time without worrying about reordering soon after fitnessing your project.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.Silicon Carbide Mineral Cuts Sharp and Leaves a Bright Finish
Nylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.The Many Benefits of Scotch Brite™ Abrasives
As a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.