through rough waters
Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 4 in x 3/8 in, 25 ea/Case
$10.82 / Each
| SKU | 7010309485 |
|---|---|
| Legacy SKU | 61500120730 |
| UPC | 00048011009407 |
| Product Number | CS-DC |
Scotch-Brite Clean and Strip Disc was designed to help operators tackle tough metalworking challenges: think paint prep and coating and corrosion removal. When removing unwanted contaminants and stubborn imperfections or smoothing a rough surface its a good idea to have a load-resistant, sharp-cutting abrasive on hand.
- Removes paint, rust and coatings quickly without compromising the geometry of the workpiece
- Thin width gets into tight corners for complete cleaning, stripping, and surface prep
- Provides greater surface area than wire brushes
- Extra coarse (XCS) grade silicon carbide provides aggressive cutting and leaves a finish than wire brushes
- Load and heat resistance offers prolonged operation and consistent finishing results throughout disc life
- Smear resistant, non-woven web material provides uniform wear over the life of the disc
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 4 in | 101.6 mm |
| Center Hole Diameter | 3/8 in | 9.398 mm |
Shipping Dimensions |
|
| Weight | 2.39 lb |
|---|---|
| Length | 8.7 in |
| Width | 8.6 in |
| Height | 4.9 in |
| Color | Black |
|---|---|
| Thread Size | Non Pertinent |
| Maximum Speed | 6,000 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite™ Clean and Strip Disc for?
The Scotch-Brite™ Clean and Strip Disc, CS-DC, SiC Extra Coarse, 4 in x 3/8 in, 25 ea/Case is designed for surface preparation tasks such as cleaning welds, removing rust or paint coatings from metal surfaces.
-
Will the disc work on stainless steel surfaces?
Yes! This disc works well on a variety of metallic components including aluminum and stainless steel.
-
Is it easy to change this attachment between different power tools?
Absolutely. This abrasive product can be attached to an angle grinder or other similar machines with ease using its quick-change features.
-
Can you explain what makes these discs different from traditional sandpaper?
Scotch-Brite™ Clean and Strip Discs are superior to traditional abrasives because they break down more slowly which reduces cutoff rates. They also generate less heat than regular sanding methods thereby reducing warping caused by excessive heat away which maintains quality workmanship standards
-
Is there any chance that this will cause unwanted scratches or swirl marks on my project's surface finish?
The CSA clean and strip made up of newer material compared to tradition abrasives.Grains embedded throughout create a higher density that offers both improved cut-rate performance whilst minimizing underbrush-scarring . Meanwhile , non-woven fibrous act moves freely within our enhanced open web allowing the abrasive grains to conform better while working efficiently producing cleaner finishes.
Scotch-Brite™ Clean and Strip Disc has all the benefits operators have come to expect from Scotch-Brite™ abrasives, including good load resistance and consistent cutting action. This abrasive is ideal for high-production environments and projects that generate a lot of dust, such as coating and corrosion removal. The disc features a standard attachment system and may be connected to a backstand, right angle grinder or die grinder.
Silicon Carbide Mineral Cuts Sharp and Leaves a Bright FinishNylon fibers on Scotch-Brite™ Clean and Strip Disc are interspersed with extra-coarse (XCS) silicon carbide mineral. This disc uses extra-coarse (XCS) mineral, because it cuts more aggressively than minerals in a finer grade. Among synthetic minerals, silicon carbide is one of the sharpest. It breaks down faster than aluminum oxide but leaves a finer finish.
The Many Benefits of Scotch Brite™ AbrasivesAs a Scotch-Brite™ product, this disc is engineered with open nylon web, which is why it's such a great match for cleaning welds, removing rust and stripping paint. The gaps between nylon fibers permit debris to escape. The benefits of this are twofold. First, it enhances the abrasive's ability to withstand loading. Second, because the abrasive does not get clogged with debris as easily, it has prolonged service life. The nylon fibers break down continuously during grinding, revealing fresh mineral for ongoing sharp cutting action and consistent finishes – part after part.
