3M™ Cubitron™ II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. It’s also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.
- Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Easy to use, with less gouging than fiber discs and bonded wheels
- Offers a great balance of fast cut and long life
|Diameter||4-1/2 in||114.3 mm|
|Maximum Speed||13,300 rpm|
What makes the 3M™ Cubitron™ II Flap Disc 967A a good choice for metalworking?
The Cubitron II abrasive grains featured on this flap disc are precision-shaped and self-sharpening, providing faster cut rates while also extending disc life.
How many discs come in each case of the 3M™ Cubitron™ II Flap Disc 967A?
Each case contains a total of ten (10) flap discs, which can help keep your supplies well-stocked for ongoing projects.
What is the recommended application method for using this type of flap disc?
This particular style is made to be used with angle grinders or other similar tools that accept T29-style backing plates. Directional use should match the arrow printed on each individual unit.
Is there anything special I need to do when storage these flap discs between uses?
To prevent any possible contamination that could lead to degraded performance, we suggest storing your unused materials in their original packaging or another clean location until needed again.
; Can you provide any specific safety guidelines related to using these flap discs during an industrial project?
; We always recommend wearing appropriate PPE like gloves and eye protection when working around power tools. Additionally, it's essential only to operate equipment according to its manufacturer's instructions and safeguard against accidental injury whenever possible.
3M™ Cubitron™ II Flap Disc 967A – powered by 3M Precision-Shaped Grain and a poly-cotton backing – is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.Flap Disc Design
Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.Powered by 3M Precision-Shaped Grain
3M™ Cubitron™ II Flap Disc 967A features proprietary 3M Precision-Shaped – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.Applications
- Weld removal
- Light deburring
- Scale removal
- Oxide removal
- Surface prep