3M™ Cubitron™ II Stikit™ Paper Disc 732U, 80+ C-weight, 5 in x NH, D/F 5HL, Linered w/Tab, Die 500FH, 50 per inner, 250 per case

$0.64 / Each

SKU	7100044454
Legacy SKU	60440296279
UPC	00051125868303
Product Number	732U

3M™ Cubitron™ II Stikit™ Paper Disc 732U features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 4x as long as conventional abrasives.

Revolutionary 3M Precision-Shaped Grain technology provides fast cut and long life
Cuts up to 2x as fast as conventional abrasives
Lasts up to 4x as long as conventional abrasives
Ideal for a wide variety of substrates and applications focused primarily on stock removal
3M™ Stikit™ attachment makes changing discs fast and easy

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Diameter	5 in	127 mm

Shipping Dimensions
Weight	5.533 lb
Length	11.25 in
Width	5.875 in
Height	6.25 in

Color	Purple
Maximum Speed	12,000 rpm
Grit	80+

PRODUCT FAQ

What makes the 3M™ Cubitron™ II Stikit™ Paper Disc unique?

The 3M™ Cubitron™ II Stikit™ Paper Disc is made with precision-shaped, self-sharpening ceramic grains that result in a faster cut rate and longer life than other discs.
What sizes are available for this product?

This product is available as a 5-inch disc (which means it has a diameter of five inches) but can be used without an attached center hole to fit any backup pad.
How many pieces come per case?

There are 250 pieces of the 3M ™Cubitron ™II Stikit ™Paper Discs in each case, which includes five inner packs with fifty pieces each.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Outstanding Stock Removal on a Range of Substrates

These discs are perfect for a wide range of applications that focus primarily on removing stock. They are highly effective on a variety of substrates, including metals, composites, gelcoat, and whitewood. The C-weight paper backing is ideal for sanding applications where edge retention is not a primary requirement. For optimal results, use with 3M™ Elite Random Orbital Sanders.

The Productivity Advantage of 3M™ Stikit™ Discs

The 3M™ Stikit™ system eliminates the time-consuming task of applying adhesive to the disc backing. These high-quality, coated abrasive products come ready to use with a pressure-sensitive adhesive coating on the backside. Attaching them to your disc pad is as simple as pressing on a sticker. The adhesive is pressure-sensitive, so the disc can be easily peeled off of the disc pad, leaving a clean surface for your next disc. A Stikit™ disc must be pressed onto a Stikit™ backup pad (also called a disc pad and sold separately) that is attached to a disc sander, random orbital sander, or stationary disc sander.