3M™ Cubitron™ II Stikit™ Paper Disc Roll 732U, 120+ C-weight, 3-1/2 in x NH, Die 350HH, 100 Discs/Roll, 4 Rolls/Case

$50.57 / Roll

SKU	7100081363
Legacy SKU	60440299976
UPC	00051125871976
Product Number	732U

3M Cubitron II Stikit Paper Disc Roll 732U features 3M Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or plowing like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 4x as long as conventional abrasives.

Revolutionary 3M Precision Shaped Grain technology provides fast cut and long life
Cuts up to 2x as fast as conventional abrasives
Lasts up to 4x as long as conventional abrasives
Ideal for a wide variety of substrates and applications focused primarily on stock removal
3M™ Stikit™ attachment makes changing discs fast and easy
Convenient disc rolls eliminate the need to remove disc liners from individual discs

Add to cart

Superior Cut Rate

Durable

Custom Fit

Can Use on Many Surfaces

Product Dimensions	Imperial	Metric
Weight	0.64551 lbs
Width	6 in
Length	7 in
Height	1-1/2 in
Diameter	3-1/2 in	88.9 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	2.79987 lb
Length	12.99213 in
Width	6.5748 in
Height	3.66142 in

Color	Purple

PRODUCT FAQ

What is the 3M™ Cubitron™ II Stikit™ Paper Disc Roll 732U made of?

The 3M™ Cubitron™ II Stikit™ Paper Disc Roll 732U features precision-shaped ceramic abrasive grains that are engineered to cut faster and last longer.
Are these discs durable enough for heavy-duty use?

Yes, the 120+ C-weight construction and die-cut backing make these discs ideal for demanding grinding applications on a variety of metals.
How long will these discs last in typical usage conditions?

With its advanced ceramic abrasive technology, the Cubitron II discs consistently outperform traditional aluminum oxide ones. This means you can enjoy up to twice the lifespan while maintaining consistent performance.
How easy are they to change between tasks?

; The Stikit adhesive backings allow quick attachment and removal from your backup pads. They remain securely attached during use yet release cleanly when it’s time to swap them out or switch grades.
: Is this specific reference compatible with my equipment?

: Our paper disc roll has an NH size which stands for "no hole". As long as your backing pad corresponds with that same dimensions those products should be compatible without any problems

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Product Description: 3M™ Stikit™ Discs

3M™ Stikit™ Discs are versatile and effective abrasive products that are suitable for a wide range of applications. These discs are designed for stock removal and can be used on various substrates, including metals, composites, gelcoat, and whitewood. The C-weight paper backing is ideal for sanding applications where edge retention is not a primary requirement. For optimal results, it is recommended to use these discs with 3M™ Elite Random Orbital Sanders.

The 3M™ Stikit™ system eliminates the need for applying adhesive to the disc backing, saving time and effort. These high-quality, coated abrasive products come with a pressure-sensitive adhesive coating on the backside, making it easy to attach them to a disc pad. The adhesive is pressure-sensitive, allowing the disc to be peeled off the disc pad effortlessly, leaving a clean surface for the next disc. To use a Stikit™ disc, it must be pressed onto a Stikit backup pad (also known as a disc pad and sold separately) that is attached to a disc sander, random orbital sander, or stationary disc sander.

Effective on a wide variety of substrates
C-weight paper backing is well suited for sanding applications
3M™ Stikit™ system eliminates the need for applying adhesive to the disc backing
Pressure-sensitive adhesive coating on the backside makes it easy to attach the disc to a disc pad
Stikit™ disc can be peeled off the disc pad effortlessly, leaving a clean surface for the next disc
Must be used with a Stikit backup pad that is attached to a disc sander, random orbital sander, or stationary disc sander