Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What is the Scotch-Brite EX2 Deburring Wheel?
The Scotch-Brite EX2 Deburring Wheel is an abrasive wheel that efficiently removes burrs, sharp edges, and other imperfections from metal surfaces.
What are its features?
This deburring wheel features tough and conformable fibers for effective material removal without sacrificing workpiece detail or quality. It also resists loading and keeps the abrasive minerals cutting in high-pressure applications.
What size is it available in?
This particular model measures 8 inches by 2 inches by 3 inches, making it suitable for larger surface areas like metal sheets and plates.
What type of surfaces can this deburring wheel be used on?
You can use this deburring wheel on a wide range of materials such as aluminum, stainless steel, brass or bronze while providing optimal finishes with minimum break down yielding consistent results every time.
; How many wheels are included per case?
; There are two (2) XWL grade fine wheels provided per case which provides more value to customers looking to finish their tasks effectively at lower investment costs.
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.