Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||16 in||406.4 mm|
|Maximum Speed||2,250 rpm|
What is the Scotch-Brite™ EX2 Deburring Wheel made of?
The Scotch-Brite™ EX2 Deburring Wheel is made up of durable, tough plastic fibers.
How effective is the 9S fine grit on this deburring wheel for smoothing rough edges?
The 9S fine grit on this deburring wheel works very effectively to smooth and remove burrs from metal surfaces with a high-quality finish compared to our other options such as XL-WL or A FIN.
What are some applications where I can use this product in my workspace?
This product can be used in a range of different applications including weld cleanup, cleaning corroded metals, removing surface defects from parts and much more. It provides excellent performance when it comes to producing consistent finishes every time.
Are there any safety precautions that need to be taken before using this product?
As with all power tools and abrasive products, proper personal protective equipment should be worn such as gloves and safety glasses while using the deburr wheel. Also ensure you follow instructions provided by 3M team for best results.
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.