Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What makes the Scotch-Brite™ EX2 Deburring Wheel stand out from other deburring wheels?
The Scotch-Brite™ EX2 Deburring Wheel is made with a convolute construction, which gives it the ability to conform to surfaces and provide uniform wear. It also has a long life and runs very cool, making it perfect for use on heat-sensitive materials.
Is the X2-WL variation suitable for my needs?
The X2-WL variant of the Scotch-Brite™ EX2 Deburring Wheel is perfect for medium burr removal or surface finishing. If your application requires more aggressive deburring action, we offer Coarse (XC), Medium (XCS), and Fine (XL) variations as well.
How many of these wheels come in each case?
Each case of 3M's Scotch-Brite™ EX2 Deburring Wheels contains one wheel per case, which measures 12 inches by 1 inch by 5 inches.
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide, on the other hand, is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.