Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||6 in||152.4 mm|
|Maximum Speed||6,000 rpm|
What makes the Scotch-Brite™ EX2 Deburring Wheel different from other deburring wheels?
The Scotch-Brite™ EX2 Deburring Wheel is made with a unique construction that reduces the likelihood of smearing while improving cutting and conformability. This results in a more consistent finish than what you would see with traditional abrasives.
Can the X2-WL wheel be used for fine polishing, or just for rough deburring work?
Yes, absolutely! Although our Scotch-Brite™ EX2 Deburring Wheels are especially effective at quickly removing burrs and surface imperfections on softer metals like brass and aluminum, they're also versatile enough to be used for any number of applications involving blending, finishing, preparation prior to painting or plating, and even fine polishing.
How long will each abrasive pad last?
While it can depend somewhat on your specific application, most customers find that each 6 x 7/8" wheel lasts quite some time before needing replacement- sometimes as many as hundreds of parts. But since every metal type shapes differently we always suggest testing one part with the product; once you know how much pressure this requires its going to improve your time efficency uses of consumable products such as this terrific scotch brite debur wheel .
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide, on the other hand, is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.