Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||10 in||254 mm|
|Maximum Speed||3,600 rpm|
What is the Scotch-Brite™ EX2 Deburring Wheel made of?
The wheel is made with open-web construction and uses aluminum oxide abrasive mineral mixed with ceramic grain.
Can this deburring wheel be used on any surface?
Yes, it can be used on almost all metals as well as plastics and ceramics.
What type of deburring applications is this wheel ideal for?
This deburring wheel works best for removing heavy burrs or imperfections after machining, stamping, or welding steel.
Is there a specific tool I need to use the Scotch- Brite™ EX2 Deburring Wheel ?
A bench grinder at a speed no higher than 3500 RPM should be sufficient for use with our deburring wheels.
Is an 8S fine grit good enough smoothing rough edges that may result in injury?
A:The 8S fine grit designates a very light abrasive action which smooths surface areas without altering its dimensions significantly. We strongly recommend taking safety precautions when handling sharp objects in order to avoid harm and ensure your well-being.
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.