Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What is the Scotch-Brite™ EX2 Deburring Wheel's purpose?
The Scotch-Brite™ EX2 Deburring Wheel provides a great solution for customers looking to deburr and blend on harder metals such as carbon steel, stainless steel, and aerospace alloys.
Can this product remove coarse burrs effectively?
Yes! 3M’s unique grain and construction will effectively clean up even tough-to-reach spots or delicate finishes with minimal if any change in material geometry.
How long does it last?
Compared to other brands of deburring wheels that one can find in the market, our Ex series lasts longer due to technology advancements making them highly durable and robust enough for tough metalworking applications.
Is there a maximum RPM rating for this wheel?
:Yes, our X2-WL series has a maximum RPM of 5500 rpm. It is important that you look at your tool specs when considering using this or other abrasive products from us to ensure optimal performance without damaging them.
: What are some of the safety precautions one should consider while handling this product?
A : For your own safety and those around you wearing personal protective equipment like eye goggles is essential. Additionally, follow all warnings listed on packaging materials before use such as locking out machinery when finished with work helps prevent accidents from happening.
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.