Scotch-Brite™ EX2 Deburring Wheel is a convolute-constructed wheel that provides mid-range aggressiveness and hardness for deburring, edge radius, blending, polishing, and finishing. This deburring wheel performs best when consistently presented with a sharp edge or metal burrs.
- Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites
- Tough, layered, unitized construction can operate clockwise or counterclockwise directions
- Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications
- Resists smearing for cleaner surfaces and less preparation
- Minimizes heat build up to lessen impact on heat-sensitive materials
|Diameter||10 in||254 mm|
What kind of materials can the Scotch-Brite™ EX2 Deburring Wheel work with?
The Scotch-Brite™ EX2 Deburring Wheel works well on all metals, including aluminum, brass, bronze, carbon steel, cast iron and stainless steel.
How long does the deburring wheel last?
The lifespan will depend on how much use it gets. However, rest assured that 3M's unique web construction and high-quality abrasive grains of this wheel help increase life like never before.
Does the product require any special tools or equipment for set-up/use?
This product is designed to be used with standard bench grinders. No special equipment is necessary!
Can you explain what "8S FIN" means in regards to this product?
The "8S FIN" refers to its grade - which stands for a very fine surface finish (comparable grit range would be somewhere around a P600-800).
The Scotch-Brite™ EX2 Deburring Wheel is a high-performance wheel that combines mineral and density to provide a moderate degree of conformability, wheel hardness, and edge retention. The wheel is uniquely suited to applications where these features are needed. The wheel is designed with a unique resin system that helps minimize smearing and reduces heat build-up. The open-web construction of the wheel ensures that it runs cool and resists loading, reducing the risk of part discoloration and warping while extending the life of the wheel. The EX2 Deburring Wheel is available in fine and medium grade abrasives.
The EX2 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide, on the other hand, is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material used in the EX2 Deburring Wheel runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.