Scotch-Brite™ EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
|Diameter||12 in||304.8 mm|
|Maximum Speed||3,000 rpm|
What is the Scotch-Brite™ EX3 Deburring Wheel, X3-WL?
The Scotch-Brite™ EX3 Deburring Wheel, X3-WL is a non-woven abrasive wheel designed for deburring and finishing operations on various types of metals.
How fine is the 8S Fine wheel grade?
The 8S Fine wheel grade has a grit size equivalent to approximately 320-400, which makes it ideal for achieving finer finishes and removing slight burrs.
What are the dimensions of this deburring wheel?
This particular model measures 12 inches in diameter by half an inch wide with a center hole that's five inches in diameter.
How many wheels come in each case?
Each case includes two units of this Scotch-Brite™ EX3 Deburring Wheel, X3-WL.
. Which materials can I use this deburring wheel on?
. You can use this deburring wheel on various metals including stainless steel, carbon steel, aluminum without damaging or distorting them.
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. Although silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.