Scotch-Brite™ EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What is the Scotch-Brite EX3 Deburring Wheel?
The Scotch-Brite EX3 Deburring Wheel is a high-performance deburring wheel designed to remove burrs and sharp edges on metal parts while leaving a clean surface finish.
What are the dimensions of the X3-WL, 9S Fine, 8 in x 1/2 in x 3 in,4 ea/Case?
The dimensions of the X3-WL, 9S Fine, 8 in x 1/2 in x 3 in wheel are eight inches in diameter, half an inch thick with three-inch center hole. Each case contains four wheels.
Is this product suitable for use on all types of metals?
Yes! The Scotch-Brite EX3 Deburring Wheel can be used on various types of metals such as aluminum alloys brass/bonze/copper alloys carbon steel stainless steel titanium and more!
How long will this deburring wheel last?
This depends largely on how often it's used and what type of metal surfaces you're working with. However, generally speaking these durable abrasives provide consistent results throughout their life meaning less need for frequently replacements under standard operating conditions.
Is there any maintenance needed to keep this abrasive functioning properly over time?
The performance life o our products tends to extend longer if cared according to recommended practices that include not letting excess debris accumulate which may slow down cutting action so avoid selecting individual product by monitoring proper operation for optimized performance
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. Although silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
- Effective for deburring, blending, finishing, and polishing edges on various materials
- Available with silicon carbide or aluminum oxide abrasive mineral
- Silicon carbide produces a finer finish while aluminum oxide provides high cut-rate and long life
- Scotch-Brite™ industrial abrasives deliver consistent results for the life of the product
- The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers