through rough waters
Scotch-Brite™ EX3 Deburring Wheel, 6 in x 1/2 in x 1 in 9S FIN, 4 ea/Case
$63.41 / Each
| SKU | 7010365081 |
|---|---|
| Legacy SKU | 61500136579 |
| UPC | 00048011240268 |
| Product Number | X3-WL |
Scotch-Brite EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 6 in | 152.4 mm |
| Center Hole Diameter | 1 in | 25.4 mm |
Shipping Dimensions |
|
| Weight | 2 lb |
|---|---|
| Length | 6.7 in |
| Width | 6.7 in |
| Height | 3.1 in |
| Color | Gray |
|---|---|
| Maximum Speed | 6,000 rpm |
PRODUCT FAQ
-
What is the Scotch-Brite EX3 Deburring Wheel good for?
The 3M Scotch-Brite EX3 Deburring Wheel is an excellent choice for removing burrs and sharp edges from metal parts.
-
How long does the wheel last?
The life of the wheel will depend on how much use it gets, but customers have reported that they can last for a relatively long time compared to other options.
-
Can I use this with my angle grinder?
Yes, you likely can. The Scotch-Brite EX3 deburring wheel has a standard size arbor hole and therefore should work without any issue in most grinders.
-
Do I need to wear personal protective equipment when using the deburring wheel?
It's always best to be safe. Because there are certain hazards associated with abrasive wheels like these, we recommend wearing proper eye protection and gloves when using them.
-
. Does it come in different sizes or only available in 6 x 1/2 x 1 inches.
. While this exact model comes specifically as a 6 x 1/2 x 1 inch option (4 units per case), we offer similar products suited for various shapes and sizes depending on your project needs; so please let us know what you're working on so that we may find the right solution that meets your needs.
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. Although silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.