Scotch-Brite™ EX3 Deburring Wheel is a convolute-constructed, hard, durable deburring wheel suited for applications where edge retention is a must. The wheel performs best when consistently presented with a sharp edge or metal burrs. A unique resin system resists smearing and heat buildup.
- Highest edge retention and durability in the Scotch-Brite™ Deburring Wheel line provides aggressive edge deburring
- Specially engineered to condition sharp edges and metal burrs
- Convolute construction provides a balanced, smooth running wheel throughout product life
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What is Scotch-Brite™ EX3 Deburring Wheel?
Scotch-Brite™ EX3 Deburring Wheel is a high-performance abrasive wheel designed to replace traditional abrasive wheels for deburring, blending and finishing applications.
What type of surface can it be used on?
It can be used on a variety of surfaces including metals such as aluminum and stainless steel, plastics, composites, and other materials.
What makes this deburring wheel unique compared to others in the market?
The Scotch-Brite™ EX3 Deburring Wheel has a proprietary construction that provides longer life than conventional flap wheels. Its open web design means less downtime changing out worn discs over time. Also noteworthy is its ability to generate consistent finishes compared with other products.
Do these come in different sizes or options?
Yes! This specific model comes with dimensions 8 x 2 x 3 inches but we do offer many different widths and diameters depending on your application needs. We understand that everyone's needs are not alike so customization isn't uncommon with our customers either, feel free to reach out if you have any special requests or questions about sizing configurations for your project.
Scotch-Brite™ EX3 Deburring Wheel is an effective tool for deburring, blending, finishing, and polishing edges on various materials such as glass, hard and soft composites, and metals including builder's hardware, medical instruments, metal fabrication, metal implants, plumbing fixtures, and turbine engines. However, it is not recommended for applications where conformability and finishing of flat surfaces are required due to its hard density.
The EX3 Deburring Wheel is available with either silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. On the other hand, aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. Although silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products that incorporate abrasives into non-woven nylon or synthetic fibers. This combination creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
- Effective for deburring, blending, finishing, and polishing edges on various materials
- Available with silicon carbide or aluminum oxide abrasive mineral
- Silicon carbide produces a finer finish while aluminum oxide provides high cut-rate and long life
- Scotch-Brite™ industrial abrasives deliver consistent results for the life of the product
- The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers